ウォーターポンプとは

ウォーターポンプには、さまざまな用途、さまざまな運搬用液体媒体、さまざまな流量、さまざまなリフト範囲があります。したがって、当然のことながら、それらの構造形態や材料も異なります。要約すると、それらは大まかに分けることができます:1.都市給水2、下水システム3、土木工学、建築システム4、農業用水利システム5、発電所システム、6、化学システム7、石油工業システム8、鉱業および冶金システム9、軽工業システム10、船舶システム。

Energy conservation and emission reduction have become the main content of China's economic development plan, especially for power, steel, non-ferrous metals, petrochemicals, 水処理 and other industries with high energy consumption, more stringent emission reduction policies have been put forward. As the fluid conveying equipment in the industrial center, the 送水ポンプ occupies the main part of energy consumption, and it has become the main problem to be solved in the energy saving operation.

The most common way to drive the 送水ポンプ is to drive it with an electric motor. The energy saving method of the pump is mainly to make the pump unit (pump, prime mover and conversion part) run at the highest power, so that the electric energy consumed by the external input is reduced to the lowest point. The energy saving of the pump is a comprehensive technology, which involves the energy saving of the pump itself, the energy saving of the system and the operation of the application management.

1. If the 送水ポンプ has any small fault, remember not to let it work. If the packing of the 送水ポンプ shaft is worn out, it should be added in time. If the 送水ポンプ is continued to be used, air will leak.

2. If the 送水ポンプ vibrates strongly during use, be sure to stop and check the cause, otherwise it will also cause damage to the pump.

3. The 送水ポンプ must be maintained after use. For example, when the 送水ポンプ is used up, the water in the 送水ポンプ should be cleaned up. It is best to remove the water pipe and rinse it with clean water.

4. The tape on the 送水ポンプ should also be removed, then rinsed with water and dried in the light. Do not put the tape in a dark and humid place. The tape of the 送水ポンプ must not be stained with oil, let alone some sticky things on the tape.